TOPIC: How to Detect Plumbing Problems Common in London
Plumbing is one of the integral areas of buildings in London. When the plumbing system is working adequately, there is a guarantee of comfort and convenience within the building. However, technical problems can arise and detecting these problems can be an uneasy task. In this article, you will be imparted on how to detect leak problems in your building.
The Use of Water Meter
The first thing to do is to verify the leakage status of your plumbing systems using water meter. To know your water meter location, ask the Billing Department in London.
Ensure the use of water is stopped interior and exterior parts of your building.
After the water meter has been seen, verify whether it is moving using the leak indicator. The shape of a leak indicator is determined by the brand. However, it usually comes in a portable triangular shaped dial or a portable wheel of silver. The latter usually give a rotation signal when there is a water flow within the meter. The dial on the other hand, moves to show that there is the possibility of a leak.
After you have ensued no water is used, make two meter reading at two hours intervals. If the result differs, there is a leak.
At this point, you are sure there is a plumbing problem. You still do not whether the leak is internal or external. This is what follows:
Find the shut off valve in your house and close the water at the valve.
Ensure there is no use of water again. Recheck the movement of the leak indicator. Alternatively, you can also employ the meter reading method. In cases when there is no movement in the leak indicator or there is no difference in the readings of meter, it only means the plumbing problem of leakage is within the house. If the contrary happens such that there is movement and changes, then the problem is outside your house.
If leakage status proves difficult to determine, you will need to hire a certified professional plumber in London to help you detect the problem.
Faucets with a Problem of Leakage
Generally, the primary cause of leaking faucets is slacked or worn out rubber washer. Commonly, the washer can be found under the handle. The replacement of a leaking washer can be self-accomplished if you have the right tools. However, to be on the safer side and not to make any further problems, it is better you get a professional plumber.
Toilets with a Problem of Leakage
When your toilets leak, you may not know. This is because it does not make noise. The implication of a leaked toilet is that there is great loss of water and extra cost will be incurred if the problem is not quickly rectified. Below is a very easy way to determine whether your toilet leaks or not.
Take the tank lid away
Insert some food colouring in the toilet tank’s back and withhold flushing for an approximate time of 30miminutes
Verify whether there has been a flow of colour into the toilet bowl. If the water is crystal then you can be assured that there is no leak of water. In cases where the bowl is filled with food colouring, there is a leak problem with your toilet and you need a professional London plumber.
Other common plumbing problems that require the services of a certified plumber include boiler breakdown, gas leaks, burst pipes, blocked drain, and many more. If you take an indifferent approach towards the repair of these common plumbing problems, it may have detrimental consequences on the health of the residents of the building.